SAFETY PRECAUTIONS
•Remove or control the water slurry to prevent yourself or others from slipping while cutting.
•Provide adequate ventilation in closed areas when operating a gas or diesel hydraulic power source.
•Always be well rested and mentally alert before operating the chain saw.
•Do not allow bystanders near the chain saw when starting or cutting.
•Do not start cutting until you have a clear work area and secure footing.
•Keep all parts of the body away from the chain saw during operation.
•Carry the chain saw with the tool deenergized and the bar and chain to the rear of your body.
•Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Make sure the chain stops moving when the control trigger is released.
•Keep the handle dry, clean and free of hydraulic fl uid.
•Do not use the chain saw near energized transmission lines.
•Turn off the power source or move the hydraulic control valve to neutral before setting the chain saw down.
•Use a guide bar scabbard when transporting the chain saw.
•Know the location of buried or covered electrical services before starting work.
•To avoid personal injury or equipment damage, all chain saw repair, maintenance and service must only be performed by authorized and properly trained personnel.
•Make sure the chain breaker and rivet spinner are securely mounted on fl at, clean work surfaces. Check the mounting screws/bolts often.
•Check all chain breaker and rivet spinner components regularly for wear and general condition.
7
