Unpacking and
Chapter 2
setting up
Choosing a place for the printer
Keep the following points in mind when deciding where to put your printer.
. Choose a firm, level surface where the printer will not be exposed to vibration.
. Make sure that the printer is close enough to your
computer for you to connect the two with your printer cable.
. Allow 6” (15cm) of free space on either side of the printer. (If you are going to use fanfold paper, make sure that there is adequate space for paper behind the printer).
. Make sure that the printer is not in direct sunlight.
. Make sure that the printer is well away from heaters.
. Make sure that the surrounding area is clean, dry and free of dust.
. Make sure the printer is connected to a steady power supply. It should not be on the same electric circuit as appliances that cause spikes, such as copiers or refrigerators.
. Use a power supply of the voltage indicated on the printer’s identification plate.
. Make sure that the room is not too humid.
Page 7