Star Micronics LC24-30 user manual Preventing software font selection

Unless you have altered the setting, the pitch is set to 10 characters per inch.

You can also select character pitch from software appli- cations programs. Consult the application’s manual for details.

Preventing software font selection

To prevent the font selection from being altered by a software application and to ensure that selections can be made from the control panel only, power up the printer while holding down the (FONT]key. The printer will sound a very short beep as it comes on.

Now you can put the printer in not-ready mode and select a font. Put the printer back in ready mode again, and begin printing. From now on, the font selection will not be affected by any commands received from your computer.

To enable software font selection again, turn the printer off and on again.

Page 54