Star Micronics LC24-30 user manual Use the READYkey to change the setting

Micro Feed

ALT• MacroA Zoom

FF

Electronic DIP Switch Dl (print quality) selected

Press the [FONT]and [PAPER] keys until the letter and number corresponding to the desired setting are shown. The READY light shows the current switch setting: ON or OFF.

Use the (READY]key to change the setting.

For example, to set the print quality setting to Draft, select D (press the [FONT]key until the lower two lights in the left-hand column are on) and 1 (press the [PAPER]key until the top light in the right-hand column is on). Press the (READY]key to turn the READY light off.

You can print out the current Electronic DIP Switch set- tings by holding down the (FONT]key and pressing the (READY)key.

When you have made all the desired Electronic DIP Switch settings, hold down the [FONT]key and press the (PAPERJkey to save the new settings and exit Electronic DIP Switch mode.

Your newly selected settings will automatically come into effect each time the printer is switched on, unless you decide to change the Electronic DIP Switch settings in the future.

Page 38