5.2 Printer driver
Please apply the driver stated below for using under Windows environment. Please refer to the User’s Manual for a driver.
1)Windows 95/98: NII printer driver Windows 95/98, Version 1.00
2)Windows NT4.0: NII printer driver Windows NT4.0, Version 1.00
3)Windows 2000: NII printer driver Windows 2000, Version 1.00
5.3Control command details
1) Horizontal tab | : <<HT>> |
Code | : [09] h |
Shift the print position to the next horizontal tab position
*Horizontal tab position is set by [horizontal tab set] command.
*The default of horizontal tab position is every 8th character (9th digit, 17th digit, 25th digit and 33rd digit) in font A.
*Maximum digit position for NP272 is 33rd and for
*If the next tab position is not set, this command is ignored.
2)Carriage return: <<CR>>
Code | : [0D] h |
This command is ignored. | |
3) Line feed | : <<LF>> |
Code | : [0A] h |
Prints data stored in the input buffer and executes line feed according to data | |
of feed pitch. | |
4) Page feed | : <<FF>> |
This command is effective only in Windows mode. | |
Code | : [0C] h |
*Prints data in the print line buffer and executes page feed to the head of next page according to the page length in the setting.
*Default setting for the page length is 66 lines.
5)“n” line page length setting: <<ESC C n>>
Code : [1B] h + [43] h +n* [01≤n≤FF] h
Sets a page length for “n” lines with current line feed pitch.
*Position is set to the head of page
*Line pitch change after setting will not change page length.
*Default value for “n” is [42] h for 66 lines.
*If printer is initialized, the head of page is also initialized.
6) Setting right space of a character: <<ESC | SP n>> | |
Code | : [1B] h + [20] h + n | * [00≤n≤20] h |
Sets the right space of a character by unit of dot (1/203 of an inch). In the case of double width mode, the space will be doubled. The default value of “n” is [00] h.
20
