Star Micronics NP-215, NP-415W Barcode print GS k n Dn NUL Code 1D h + 6B h + n + Dn + 00 h

28) Barcode print	:<< GS k n Dn NUL >>
Code	: < 1D >h + < 6B >h + n + Dn + < 00 >h	* < 00≤n≤07 >h
Description	: Selects barcode symbology and prints barcode.

*The next print start position is on the line head

*Select following barcode symbology with “n” value.

*Dn indicates the character code to be printed.

n (Hex)	Barcode symbology
00	UPC-A
01	UPC-E
02	EAN-13 (JAN-13)
03	EAN-8 (JAN-8)
04	CODE 39
05	ITF
06	CODABAR
07	CODE128

*When there is data in the buffer this command is neglected.

*If character code Dn is not a printable character, following data after Dn will be treated as normal data.

*If the print character numbers are fixed in the barcode symbology the input character numbers should match to the print character numbers.

*If horizontal data exceed one line, the exceeded data cannot be printed.

29)	Barcode width size select :<< GS		w n >>
	Code	: < 1D >h + < 77 >h + n		* < 02≤n≤04 >h
	Description	: Selects width of barcode
	* Default value of “n” is [03]h.
30)	Barcode height select		:<< GS h	n >>
	Code	: < 1D >h + < 68 >h + n		* < 00≤ n ≤FF >h
	Description	: Selects barcode height

*“n” shows the vertical dot number

*Default value of “n” is 162([A2]h).

31) Select of HRI character print position			:<< GS H n >>
	Code	: < 1D >h + < 48 > h +n	* < 00≤ n ≤03 >h
	Description	: Selects the print position of HRI characters in printing barcode.
	* “n” has the following meaning.
	n (Hex)	Print position
	00	No printing

01Above barcode

02Below barcode

03Above and below barcode

*HRI characters are the characters selected by “HRI character style select”.

*Default value of “n” is [00]h.

32) Select of HRI character style			:<<GS f n>>
Code		: <1D>h+<66>h+n		* < 00≤ n ≤01 >h
Description		: Selects HRI character style in printing barcode
* “n” has the following meanings:
	n (hex)	Style
	00	Font A

01Font B

*Default value of “n” is [00]h.

30