Star Micronics NP-215, NP-415W, NP-225, NP-325 Partition drive select GS % n Code 1D h + 25 h + n

51) Partition drive select			:<< GS % n >>
Code		: < 1D > h + < 25 > h + n		* < 01≤n≤03 >h
Description		: Selects partition drive.
	* “n” indicates the following:
	n(HEX)		Divide

011 fixed partition

022 fixed partitions

03automatic partition

*Default value is selected by the DIP switch (1 or 2 partitions).

*If assigned beyond the specified area, the data is neglected and the select will not change.

*Automatic partition is as follows:

	1 partition	2 partitions
NP-215/225	Less than 215 dots	More than 216 dots
NP-325	Less than 287 dots	More than 288 dots
NP-415W	Less than 415 dots	More than 416 dots

52) Print density set	:<< GS ~ n >>
Code	: < 1D > h + < 7E > h + n	* < 00≤n≤FF >h
Description	: Sets print density in the range between 65% ~ 135% of the standard value,
	S2-8 Off.

* “n” ranges from 41h(65%) to 87h(135%). However, set it for actual use in the range 41h(65%) ≤ n ≤ 82h(130%).

*At the initial status, 100% or 125% can be selected by the DIP switch, S2-8.

*This command has priority over the setting by DIP switch.

38