| L | 489 | 3908 | 1167 | 707 | 486 | 299 | |
14 | M | 368 | 2940 | 877 | 531 | 365 | 225 | |
Q | 310 | 2476 | 738 | 447 | 307 | 189 | ||
| ||||||||
| H | 210 | 1676 | 498 | 302 | 207 | 127 |
1.The first code word is 4 bit length, and following all code words consist of 8 bit length.
2.Data bit numbers include “mode indicator” and “character number indicators”.
44) NV bit image registration :<<GS T n>>
Code | : <1D>h + <54>h + n |
Description | : Register the predetermined bit image print data. |
*It is possible to register from 0 to 2 different kinds of patterns (3 patterns).
*In each pattern, up to the maximum of 15cm length (for 2” model) of bit image print data can be registered; up to the maximum of 11cm for 3” model and up to 7cm for 4” model can also be registered. The bit image print data exceeding the maximum length is neglected.
*The registered data is not erased when the power is set on or off or the printer is initialized.
*“n” has a following meanings.
n (hex) | Function |
00Start of pattern 0 registration
01Start of pattern 1 registration
02Start of pattern 2 registration
FF End of registration
*When registrations started in the middle of a line, whole line is registered.
*When registration ended in the middle of a line, whole line is not registered.
*Following is a command sequence of pattern 0 registration.
GS T 0h + (bit image data assigned by ESC *) x n lines + GS T FFh
45) NV bit image print :<< GS P n >> |
| |
Code | : <1D>h + <50>h + n | * < 00≤n≤02 >h |
Description | : Prints the bit image print data registered. | |
*Selects one of the print pattern among three registered patterns by assigning 0 to 2 value to “n”.
46) Firmware download | :<<GS d Dn>> | |
Code | : <1D>h + <64>h + Dn | |
Description | : Download printer firmware in hexadecimal code and rewrite firmware | |
according to the outcome.
* Dn is firmware’s hex code which complies with INTELLEX Hex format.
36
