Star Micronics NX-1001 manual Command Summary

I

COMMAND SUMMARY

MODECONTROLCODE			FUNCTION	PAGE
	<BEL>		Belf	67
	<BS>		Backspace	55
	<HT>		Horizontal tab	57
	<LF>		Line feed	48
	<VT>		Vertical tab	53
	<FF>		Fomr feed	51
	<Cfb		Carriage return	54
	<so>		Expanded printing for one line	43
	<Sb		Condensed printing	42
	<Del>		Set printer cm-line	66
	<DC2>		Cancel condensed printing	42
L*M<DC2>			Pica pitch	41
Std.	<DC3>		Set printer off-line	66
	<DC4>		Cancel one-line expanded prirrting	43
	<CAN>		Cancel last line	65
std.	<ESG	<LF>	Reverse line feed	48
Std.	<Esc>	<FF>	Return to top of current page	51
	<Esc>	<so>	Expanded printing for one line	43
	<Esc>	<Sb	Condensed printing	42
	<ESC> <Ehb 4>		Manual feed	67
	<ESC> <EW- <4>		Auto feed	68
	<ESC> <EiW- “R”		Eject ~aper from ASF
	<Esc>	<EM> “’l”’n	Set print start position on ASF	2:
std.	<ESC> <Sf% n		Increase character spacing	44
	<ESC> “!” n		Select master print mede	44
:::	<Esc>	“#”	Accept MSB as is	65
std.	<ESC> “$” nl n2		Absolute horizontal tab in iches	57
Std.	<ESC> Wo” <O>		Select ROM character set	64
std.	<ESC> “%” <1>		Select downfoad character set
Std.	<ESC> “%” “0”		Select ROM character set	::
Std.	<ESC> “%” “1”		Select downfoad character set	63
Std.	<ESC> “&” <O>nl n2 MOml rn2 rm? .mll
			Define draft download character	61
Std.	<ESC> “&” <O>nl n2 MOml m2 d		.m46	62
Std.	<ESC> “*” nOnl d ml m2		Define NLQ download character
			Select graphics mode	59
	<ESC> “-” <W		Step underlining	38
	<Esc> “-” <1>		Start underlining	37
	<Esc> “-” “o”		Stop underlining	38
	<Esc>	“’–”’“1”	Start underlining
Std.	<ESC> “r’ nO		Select vertical tab channel
	<E-SC>“o”		Set line spacing to 1/8 inch
	<Esc>	“l”	Set line spacing to 7172inch
Std.	<Esc>	“2”	Set line spacing to 1/6 inch	47
IBM	<ESG. “2”		Execute <ESC> “A”	48
	<ESC> “3” n			47
Std.	<Es-	“4”	::eWEcWXY”ch	36
IBM	<fKc>	“4”	Set top of page at current position	49
Std.	<Esc>	“5”	Select upright characters	36
IBM	<Esc>	“5” <b	Cancel automatic fine feed	55
IBM	<Esc>	“5” <1>	Set automatic fine feed	55

116