5-2. Printing Format
Prints one line in 7 × 9 font normal printing.
32 columns (from the 5th to 36th columns)
Even if the setting for the paper width is changed by the DIP switch, the 32- column format will not change.
5-3. Data format
<GS> <data> <LF>
5-4. Other
∙The FEED and ON LINE switches will not operate normally during validation printing.
∙When the printer receives an immediate execution command for peripheral units during validation printing, it executes the command when the validation print mode is canceled.
∙Modes in effect before the validation printing (such as emphasized printing, inverted printing, expanded printing, and underlining) are invalid during validation printing. But these become valid again after validation printing.
∙Data received before a <GS> code is printed out when the printer receives the <GS> code.
Min. 70
Print area
Paper sensor |
| Approx. |
|
position |
| 18 | |
|
| ||
52.8 | Approx. | Approx.12 |
|
17 |
| ||
100 |
|
| |
|
|
| |
Min. 120 |
|
|
|
|
|
| : m m |
Fig. 5-3 Print area
– 27 –
