Star Micronics SP300 manual Control Codes Used for Character Setting

7. CONTROL CODES

Control Codes Used for Character Setting

Control codes		Hexadecimal		Function	Page
		codes
<ESC> “R” n		1B 52 n		Select international character set	32
<ESC> “6”		1B	36	Select IBM character set #2	32
<ESC> “7”		1B	37	Select IBM character set #1	32
<ESC> “M”		1B	4D	Select 7 × 9 (half dot) font	33
<ESC> “P”		1B	50	Select 5 × 9 (2 pulses + 1 dot) font	33
<ESC> “:”		1B	3A	Select 5 × 9 (3 pulses + 1 dot) font	33
<SO>		0E		Select expanded character mode	33
<DC4>		14		Cancel expanded character mode	34
<ESC> “W” “1”	1B 57 31			Select expanded character mode	34
<ESC> “W” <1>		1B	57 31
<ESC> “W” “0”	1B 57 30			Cancel expanded character mode	34
<ESC> “W” <0>		1B	57 30
<ESC> “E”		1B	45	Select emphasized print mode	34
<ESC> “F”		1B	46	Cancel emphasized print mode	34
<ESC> “-” “1”	1B 2D 31			Select underline mode	35
<ESC> “-” <1>		1B	2D 01
<ESC> “-” “0”	1B 2D 30			Cancel underline mode	35
<ESC> “-” <0>		1B	2D 00
<ESC> “_” “1”	1B 5F 31			Select upperline mode	35
<ESC> “_” <1>		1B	5F 01
<ESC> “_” “0”	1B 5F 30			Cancel upperline mode	35
<ESC> “_” <0>		1B	5F 00
<ESC> “4”		1B	34	Select highlighted print mode	35
<ESC> “5”		1B	35	Cancel highlighted print mode	36
<SI>		0F		Select inverted print mode	36
<DC2>	12			Cancel inverted print mode	36

Control Codes Used for Line Spacing

Control codes		Hexadecimal	Function	Page
		codes
<LF>		0A	Line feed	36
<CR>		0D	Line feed (same as LF)	36
<ESC> “z” “1”	1B 7A 31		Set 1/6-inch line feed	36
<ESC> “z” <1>		1B 7A 01
<ESC> “0”		1B 30	Set 1/8-inch line feed	37
<ESC> “a” n		1B 61 n	Feed paper n lines	37

– 29 –