Data buffer |
|
|
|
|
Full | Near Full | Near Empty | Empty | |
|
|
|
|
|
Remainder |
| 256 bytes |
|
|
256 bytes |
|
|
| |
|
|
|
| |
|
|
|
|
|
X-OFF 
[Paper out]
When the “paper out” detector senses the end of the paper, the printer stops printing after printing a maximum of two more lines or on feeding the paper. The printer will set the DTR to “MARK” and set the printer to OFF LINE five seconds after a “paper out” condition is detected. To reset the printer after a “paper out”, load a new roll of paper into the printer and press the OFF LINE switch to set the printer ON LINE.
[Mechanical error]
Mechanical errors occur when the front cover is opened during printing and printing stops or when the motor locks and printing stops. After the error occurs, the printer outputs an
– 17 –
