FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

NOTE

Trigger auto-cutter drive (Auto-cutting models only)

<ESC> “d” “0” or <ESC> “d” <0>

(1B)H (64)H (30)H or (1B)H (64)H (00)H <ESC> “d” “1” or <ESC> “d” <1>

(1B)H (64)H (31)H or (1B)H (64)H (01)H

This code causes the printer to trigger auto-cutter.

Select validation printing (Models with validation function only)

<GS> data <LF> (1D)H data (0A)

Prints up to 32 columns of the 7 × 9 (half dot) font size characters on one line.

(1)Character data and immediate execution command <CAN> <SUB> <LF> are valid for data.

(2)Printing modes (such as emphasized, inverted, expanded character modes, etc.) which were set before validation printing are invalid during validation printing. (These modes become valid again after validation printing is completed.)

(Refer to “5. VALIDATION PRINTING”)

– 54 –

Page 58
Image 58
Star Micronics SP300 manual Function