– 142 –
APPENDIX
*This product contains Transmitter Module which conforms to the R&TTE
Directive.
*This roduct ontains Transmitter odule FCC ID: 4B6180210.
*This roduct ontains Transmitter odule IC: 844A-66180210.
*Strictly observe the export control laws of the country for export when
exporting this product.
Installing the Ferrite Core (Wireless LAN Model for EU Only)
Install the ferrite core onto the buzzer drive cable to prevent radio interference.
Use the ferrite core only for the wireless LAN model in the EU.
1Install the ferrite core onto the buzzer drive cable as shown in the illustration.
2Pass the fastener through the holes in the ferrite core as shown in the
illustration.
3Loop the fastener around the cable, and then pull the end of the fastener tightly
through its buckle. Use a pair of scissors to cut off the excess end of the
fastener.
Ferrite core (wireless
LAN model for EU only)
Buzzer driver cable
Up to 10 cm
Fastener
Ferrite core
Ferrite core