– 21 –
ENGLISH
6-2. Paper Loading Methods
This printer has two paper loading methods: one when using the roll paper shaft,
and one when not using the shaft. The roll paper shaft is not used for drop-in paper
loading. Select the paper loading method from the following table according to
the type of paper used.
44.5 Width < 79.5 79.5 Width 82.5
Paper thickness (
µ
m)
65 Thickness < 80 Use roll paper shaft (*1, *4) Use roll paper shaft (*2)
80 Thickness 120 Use roll paper shaft (*1, *4) Use drop-in loading (*3)
120 < Thickness 150 Use roll paper shaft (*1) Use roll paper shaft (*1)
Note:
*1: Maximum outer roll diameter: 150 mm
*2: Maximum outer roll diameter: 170 mm
*3: Maximum outer roll diameter: 180 mm
*4: The print speed must be changed from the high speed (factory default
setting) to the middle speed (140 mm/sec.). To change the print speed, use
the print speed settings command <ESC><RS> Rn. Refer to the separate
Specification Manual for details.
Paper width (mm)