Star Micronics TSP2000 Series user manual Moving blade Check window

ENGLISH

(4)If the cutter’s moving blade is protruding, use a Phillips screwdriver to turn the Phillip-head screw and return the moving blade to its home position. When the check window is completely white, the moving blade is at its home position.

Note 1: Do not apply extreme pressure to the moving blade.

Note 2: If the moving blade is protruding too much, the printer cover cannot be opened. Trying to open the printer cover may damage the cutter.

(5)Open the printer cover, remove any jammed paper, and then re-install the paper roll.

(6)Install the front cover, and then set the power switch to ON.

Moving blade

Check window

– 18 –