– 87 –
APPENDIX
Paper feed direction
1 to 2 Cutter position
Print head
printing position
Unit : mm
19.6±1

*

1
1 576
72±0.2
80 0
-1
Print area
Paper width
576 dots
Print area 72±0.2
4±14±1
0.125
0.125

A-1. General Specifications

(1)Printing method Direct line thermal printing
(2)Print speed Max. 75 mm/s
(3)Dot density 203 dpi: 8 dots/mm (0.125 mm/dot)
(4)Number of print columns
48 (12 × 24 dots)
64 (9 × 24 dots): ESC/POS mode only
(5)Roll paper Refer to chapter 2 for details on the recommended
roll paper.
Paper width: 80 mm
Roll diameter: ø90 mm or less
External diameter of core: ø18 mm
Internal diameter of core: ø12 ± 0.5 mm
(6)Bar codes UPC-A, UPC-E, JAN 13 (EAN), JAN 8 (EAN),
CODE 39, CODE 93, CODE 128, ITF, CODA BAR
(7)Sensor Paper end, cover open, paper near end, abnormal
print head temperature
(8)Overall dimension 144 (W) × 195 (D) × 138 (H) (mm)
(9)Weight Approx. 1.48 kg
Print Area
Appendix A: Specifications
0
-1.0
+0.5
0
Note *1Since the firmware automatically feeds the paper 5 mm after it is cut,
the top cutter margin becomes 24.6±1.