APPENDIX
A-2. Print Specifications
(1) Print width | 72 mm (576 dots) |
|
(2) Character size | Front A: 1.50 × 3.00 mm | |
| Front B (ESC/POS mode only): 1.13 × 3.00 mm | |
(3) Character structure | Front A: 12 × 24 dots | |
| Front B (ESC/POS mode only): 9 × 24 dots | |
(4) Character set | ASCII: | 96 |
| Extended graphics: | 128 × 8 |
| International: | 32 |
A-3. Auto Cutter Specifications
(1) Partial cut | Cutting with one point left uncut |
(2) Cutting frequency | Max. 30 cuts per minute |
(3) Thickness of paper | Max. 0.08 mm |
A-4. Interface
(1) Interface | RS232C serial interface or |
| face (IEEE1284) |
(2) Command | ESC/POS TM commands or Star commands |
A-5. Power Supply
(1) AC Adaptor | UP06021240, switching type |
(2) Input | 100 to 240V AC, 50/60 Hz |
(3) Output | DC 24V±5%, 2.5A MAX |
(4) Power Consumption | Operating: Approx. 65 VA (at print duty 14%) |
| |
(5) Power Connector |
|
Pin No. | Signal | Function | I/O |
| |
name | direction | 1 3 | |||
|
| ||||
1 | +24V | Drive power | IN |
| |
2 | SG | Signal GND |
| 2 | |
|
| ||||
|
|
|
|
| |
3 | N.C. |
|
|
| |
|
|
|
|
|
<Viewed from Connector Surface>
Note 1: This power connector is used to supply the control and mechanical sections of the printer.
– 88 –
