
ENGLISH
5. Loading the Roll Paper
Be sure to use roll paper that matches the printer’s specification.
Push the Cover open lever, and open the printer cover.
Cover open lever
Roll paper
Tension bar
(Standard Model)
Tension bar
Roll paper
(Wall Mount/Standard Model)
While observing the direction of the roll, set the paper roll into the hollow, and pull on the leading edge of the paper toward you.
Note 1: When you use a paper of the thickness which needs the tension bar (65 ∝mpaper thickness<100 ∝m), make sure not to pass the paper under the tension bar.
Note 2: When you use a paper of the thickness which doesn’t need the ten- sion bar (100 ∝m paper thickness
150 ∝m), please remove two screws at both sides of the tension bar with a screw- driver, and remove the tension bar unit in advance. Ordinarily, this procedure (removal of the tension bar) should already have been done by your dealer.
– 17 –