Star Micronics TSP800 Appendix E: Periheral Unit Drive Circuit

– 110 –
APPENDIX
Notes 1. A shield cable must be used.
2. It is not possible to drive two drives simultaneously.
3. The peripheral drive duty must satisfy the following:
ON time / (ON time + OFF time) ≤ 0.2
4. The resistance of the peripheral drive solenoid must be 24 Ω or
higher.
If it is lower than 24 Ω, over-current may flow into the solenoid,
causing the solenoid to burn.
16
Modular plug: MOLEX 90075-0007,
AMP641337, or JAPAN BURNDY B-66-4 Shield
Wire lead
Modular plug
Peripheral Drive Connector
Pin No.
Signal Function I/O
name direction
1 FG Frame ground —
2 DRD1 Drive signal 1 OUT
3 +24V Drive power OUT
4 +24V Drive power OUT
5 DRD2 Drive signal 2 OUT
6 DRSNS Sense signal IN
61
<Viewed from Connector Surface>
Appendix E: Periheral Unit Drive Circuit