Star Micronics TSP800 user manual Parallel Interface Type, Star Page mode

B-1. Parallel Interface Type

ON

OFF

No. 1 2 3 4 5 6 7 8

DIP-SW1

ON

OFF

No. 1 2 3 4

DIP-SW2

DIP-SW 1

Switch 1-1	Switch 1-2	Command emulation
ON	ON	Star Line Mode
OFF	ON	Star Page Mode
ON	OFF	DP8340 Mode

The factory settings of DIP switch are all on.

The functions of switches 1-3 through 1-8 will change according to the command emulation that has been set using switches 1-1 and 1-2.

(1) Star Line mode

Switch	Function	ON	OFF
1-1	Command emulation	Always ON
				APPENDIX
1-2	Command emulation	Always ON
1-3	Should not be changed (Should be set to on)
1-4	Sensor adjustment	Invalid	Valid
1-5	Pin #31 (INIT) reset signal	Valid	Invalid
1-6	Handshaking conditions	Offline or receive	Receive buffer full
	(conditions for BUSY)	buffer full
1-7	Automatic status back function	Invalid	Valid
1-8	Should not be changed (Should be set to on)

(2) Star Page mode

Switch	Function	ON	OFF
1-1	Command emulation	Always OFF
1-2	Command emulation	Always ON
1-3	Should not be changed (Should be set to on)
1-4	Sensor adjustment	Invalid	Valid
1-5	Pin #31 (INIT) reset signal	Valid	Invalid
1-6	Handshaking conditions	Offline or receive	Receive buffer full
	(conditions for BUSY)	buffer full
1-7	Automatic status back function	Invalid	Valid
1-8	Should not be changed (Should be set to on)

– 102 –