Advance Bass Management, Movie Mode | Philips DVP900SA/00

Press 4 to select {SETUP}.

Press SYSTEM MENU.

3 Press 1 2 to highlight {SPEAKERS}, then press 4.

Step 4: Setting the speakers’ channels

You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimize the sound according to your surroundings and setup.

IMPORTANT!

The speaker settings only available on Multi-channel audio outputs. You can also press SOUND MODE button to select Multi-channel.

Getting Started

Speakers

Movie Mode Music Mode

Setup

Front Size

Centre Size

Surround Size

Subwoofer

Use ← or → to select other options, ↓ to enter the submenu,

RETURN to leave the menu.

4Press 34 to highlight one of the options, then press 2.

{FRONT SIZE, CENTER SIZE, SURROUND SIZE}

OFF – when no speaker is connected. LARGE – when connected speakers can produce low frequency signals below 120Hz.

SMALL – when connected speakers cannot produce low frequency signals below 120Hz.

{SUBWOOFER}

ON – when a subwoofer is connected. OFF – when no subwoofer is connected.

{FRONT DISTANCE}

–Sets the distance from your listening place to the front speakers (1 ~ 11.8m).

{CENTER/REAR DISTANCE}

–Sets the distance from your listening place to the center/rear speakers. (choices different depending on the {FRONT DISTANCE} setting).

5Press 1 2 3 4 to adjust the setting that best suit your surround sound needs.

6Press OK to confirm.

Helpful Hints:

–Use the longer delay time settings when the surround/rear speakers are closer to the listener than the front speakers.

–The test tone will be automatically generated to help you judge the sound level of each speaker.