Philips DVP900SA/00_A user manual Using an accessory RF modulator, Antenna or

Connections

RF coaxial cable to TV ANT IN

3

Back of RF Modulator

(example only)

	ANT IN TO TV VIDEO	AUDIO IN
	IN	R L
		CH3 CH4
Antenna or	4
Cable TV signal
1	2
SCAN MODE

HDMI

Pr

Pb

Y

PCM /

INTERLACE

COMPONENT

D

Pr

Pb

Y

PCM /

DIGITAL/

CENTER

PROGRESSIVE

CE

COMPONENT

DTS / MPEG

L

L

L

~ AC

SIVE

MAINS

R

R

R

VIDEO

S-VIDEO

AV

COAXIAL

OPTICAL

MIXED 2CH

MAIN

SUBWOOFER SURROUND

VIDEO OUT

DIGITAL OUT

6CHDISCRETE

VIDEO

S-VIDEO

COAXIA

AUDIO OUT

AV

VIDEO OUT DIG

E n g l i s h

Scan Mode (Progressive/Interlace selector)

This switch will change the type of signal output from the Component Video Out on the DVD player.

Interlace:

Select this setting when connected to a standard (interlace format) TV.

Progressive:

Select progressive when you have a TV that can accept progressive signals (480/ 525p) to enjoy accurate colour reproduction and high quality images.

Helpful hints:

–During Progressive mode, 4:3 aspect images are distorted when TV Shape is set to ‘16:9’ . Change the TV screen’s aspect ratio settings to AUTO to avoid image distortion. (see page 31 “4:3 Aspect”).

–Some TVs and projectors are not compatible with this DVD Player. If picture distorted during progressive signals, switch the SCAN MODE to Interlace.

IMPORTANT!

–If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. The RF modulator is not supplied with the DVD Player. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

Using an accessory RF modulator

1Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to the video input jack on the RF modulator.

2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

11

/00_3139 246 13872

01-41 DVP900_00A11115/09/2004, 10:00 AM