Network Mode IP Mode | Description |
Bridged N/A
Disables Network Address Translation (NAT) and bridges the Wireless AP and LAN ports together
Wireless ISP
Static
DHCP
Connects to an external wireless network (Wireless ISP) and rebroadcasts as an internal wireless network (WLAN).
PPPoE
*See Wireless ISP section below for instructions on this
mode
Note: Depending on the modes you choose, applicable settings will be enabled/ disabled automatically.
5.Click on the LAN Setup link from the left column and configure your desired IP Address and DHCP settings for the LAN. Then click the Save button.
6.Select Radio from the left column to configure your Basic wireless settings such as the SSID, Radio Mode and Transmit Range. Then click the Save button.
Instruction Manual
8
