StarTech.com R300WN22OP5 Connection Ports, Interface, Description, Reset Button, factory defaults

Connection Ports

LAN 1

Ground LAN 2

Reset Button

Interface	Description
Reset Button	Press continually for 5 ~ 10 seconds to reset the device to
	factory defaults
LAN 1	Allows LAN connection through a Category 5 (or better)
	cable. Supports auto-sensing for 10/100Mbps speeds and
	half/ full duplex
LAN 2	Allows LAN connection through a Category 5 (or better)
	cable. Supports auto-sensing for 10/100Mbps speeds and
	half/ full duplex

Note: The reset button on the PoE injector will only work if plugged into the LAN 1 port.

Instruction Manual

4