Instruction Manual
Remote MAC Address:
Enabling this feature allows you to enter the Bluetooth MAC Address of the remote Bluetooth device (e.g.000272463b86) to which the Bluetooth to Serial Adapter will be linking. If it is disabled or MAC address is left empty, any remote Bluetooth device can pair with the Bluetooth to Serial Adapter. Once the necessary changes have been made, please click the Save button, followed by Yes and OK on the following screens respectively.
Please note: Be sure to click the Save button in each modification parameter, or settings will be lost.
Configuration: Security
Secure Connection (Default PIN = 1234). Disabling this function will allow other Bluetooth devices to connect with this Bluetooth to Serial Adapter without confirming a PIN code. If it is enabled, then you should enter a PIN code (length <=12 digits). By default this feature is enabled and the PIN code is 1234.
PIN stands for Personal Identification Number. Enter the PIN code, keeping it the same as the remote Bluetooth device, so the two devices can be paired together.
Once you have made your selection, please click on the Save button.
Configuration: UART Configure
Change UART parameters, Bluetooth to Serial Adapter will use them to connect with a
Baud Rate: 9600 ~ 460800 (Default 115200)
Stop Bit: One/Two (Default One)
Parity Bit: None/Odd/Even (Default None)
Following selection, please press the Save Button.
Please note : Maximum Baud Rate: 460.8 Kbps.
4
