SERVICE HANDBOOK
Your safety and the safety of others is extremely important in the servicing of this water heater. Many safety- related messages and instructions have been provided in this handbook and on your water heater to warn you and others of a potential hazard. Read and obey all safety messages and instructions throughout this handbook. It is very important that the meaning of each safety message is understood by you and others who service this water heater.
The information contained in this handbook is designed to answer commonly faced situations encountered in the operation of the standard Residential Gas product line and is not meant to be
When servicing residential water heaters, it is essential that you return the unit to a safe condition before you leave the site. All original components must be
IMPORTANT: It is recommend that on every service call an inspection & cleaning of the base ring filter and flame arrestor be performed. See page 19.
Tools Required (for servicing gas models):
•Phillips head screw driver
•3/8, 7/16, & 3/4 inch open end wrenches
•3/16 inch Allen wrench
•11/16 inch – 6 point – socket – for anode removal
•electrical multimeter (with alligator leads)
•digital or analog manometer
•gas pressure gauge
•water pressure gauge
•thermometer
•tubing cutter if pilot tube is to be replaced
•hose – to drain tank
• container – to measure gallons per minute flow | Digital manometer shown. |
|
3
