BULLETIN 23

CHLORINATION PROCEDURE

CAUSES

The chlorination procedure is used to eliminate various bacteria that accumulate and grow in water heaters. These bacteria often cause odorous or discolored water conditions.

PROCEDURE

Please read the steps of the chlorination procedure prior to beginning. If you feel

 

uncomfortable performing any of these steps, contact a service person to perform this

 

procedure for you.

STEP 1

Turn off the gas or electric supply to the tank.

STEP 2

Turn off the cold water supply valve to the tank.

STEP 3

Open a nearby hot water faucet to relieve the vacuum.

STEP 4

Drain all the water from the tank (a water-hose may be needed).

STEP 5

Remove the anode rod(s), and close the drain valve.

STEP 6

Using a funnel in the anode opening add one gallon of household chlorine bleach for every

 

25 gallons of tank capacity.

STEP 7

Reinstall anode rod(s) after inspecting and replacing as needed.

STEP 8

Open cold water supply valve and refill the system. Then draw the water to every hot

 

water fixture, until the smell of chlorine is detected. Operate dish and clothes washers until

 

a noticeable amount of the chlorine is detected as well. All hot water lines must receive

 

treatment.

STEP 9

Leave the chlorine solution undisturbed for one hour or more.

STEP 10

After the contact time has elapsed, drain the tank according to steps #2, #3, & #4.

STEP 11

Close the drain valve and refill the tank. Allow the tank to sit for 15 minutes. Repeat steps

 

#2, #3, and #4. Continue to flush the tank if the water is discolored or contains a chlorine

 

odor.

STEP 12

Close the drain valve and refill the tank. Flush all chlorine from the piping by opening every

 

hot water outlet/ appliance.

STEP 13

Return hot water heating system to service by following the recommended start-up

 

procedure posted on the unit or in the manual.

 

 

33

Page 32 Page 34
Page 33
Image 33
State Industries GSX, GS6, GPX manual Chlorination Procedure, Step
Page 32 Page 34

GPX, GS6, GSX specifications

State Industries offers a range of high-quality residential and commercial water heaters that cater to diverse customer needs. Among their prominent models are the GSX, GS6, and GPX, each equipped with unique features, advanced technologies, and distinct characteristics that enhance their performance and efficiency.

The GSX series is well-known for its energy efficiency and reliability. It utilizes a high-efficiency gas burner to provide fast recovery rates, making it suitable for households with high hot water demand. The GSX water heaters are designed with a Foam Insulation System that minimizes heat loss and maximizes energy conservation. Additionally, their innovative design includes a durable glass-lined tank to prevent corrosion, ensuring long-term performance and extended lifespan.

Moving on to the GS6 model, this water heater is characterized by its user-friendly control features, including an adjustable thermostat that allows for precise temperature settings. The GS6 is built with a robust gas control valve that enhances efficiency and helps maintain consistent water temperature. The model is also designed with an anode rod that minimizes corrosion, prolonging the life of the tank. Its standing pilot light system provides reliable ignition, while its compact design makes it suitable for various installation locations, even in tight spaces.

The GPX series stands out in the market with its advanced technological features and sleek design. It integrates smart technologies designed to monitor and optimize performance. The built-in diagnostics programmable control allows users to track system performance and troubleshoot any potential issues easily. The GPX models also come equipped with a high-efficiency condensing gas burner that maximizes energy use, contributing to reduced utility bills. Furthermore, their stainless steel construction adds to their durability and resistance against rust and corrosion.

In summary, State Industries' GSX, GS6, and GPX models represent innovation in the water heating industry. They incorporate energy-efficient technologies, durable materials, and user-friendly controls, making them reliable choices for both residential and commercial applications. With custom features tailored to meet varied needs, these water heaters uphold State Industries' commitment to quality and customer satisfaction, ensuring that users enjoy consistent hot water while being conscious of energy consumption.
Top Page Image Contents