Manuals / Sterling / Marine Equipment / Marine Battery

Sterling SSk-3 SSK-3, Disassemble the material line on the lateral inlet of the hopper, SM3-610

Models: SSk-3

1 28

Download 28 pages 50.69 Kb

Page 21

Disassemble the material line on the lateral inlet of the hopper.

SSK-3

Depressurize the compressed-air line to the hopper (only with compressed-air valve).

Disassemble the material line on the lateral inlet of the hopper.

Remove the connecting plug (B) “conveyor control” on the connection housing of the hopper.

Disassemble the hopper.

SM3-610

Maintenance 20

Image 21

Sterling SSk-3 SSK-3, Disassemble the material line on the lateral inlet of the hopper, Disassemble the hopper, SM3-610

Contents

Sterling Material Processing Operating Instructions Conveyor Hopper SSK-3SM3-610 SSK-3 Sterling Material Processing Technical serviceTelephone 800 Edition 12/97 SM3-610SSK-3 Sales and Contracting Department Parts and Service Department1. Safety instructions Table of contents2. Installation instructions 3. Functional description 4. Maintenance1. Safety instructions Safety instructionsSSK-3 Safety instructions SSK-3 1.1. Warnings and symbols∙ ∙ ∙ ∙ ∙ ∙ SSK-3 1.2. Explanations and informationSafety instructions SSK-3 1.3. For your safety 1.4. For the safety of the equipmentSafety instructions 2. Installation instructions Installation instructionsSSK-3 SSK-3 2.1. Transport 2.2. Set-upInstallation instructions Mount the hopper loader in such a way that the outlet flap swings in a right-hand angle to the direction of machine movement. Please check during assembly that the admissible bearing loads are not exceeded Installation instructionsSSK-3 Installation instructions SSK-3 2.3. Compressed-air supply only with compressed-air valvesSSK-3 2.4. Electrical connection Installation instructionsThe rules of the local electricity board must be observed Installation instructions SSK-3SM3-610 3. Functional description Functional descriptionSSK-3 4. Maintenance MaintenanceSSK-3 Please observe the maintenance intervals MaintenanceSSK-3 4.1. Maintenance intervals MaintenanceDaily SSK-3 4.2. Disassembling the hopper Wait until the conveying procedure has stoppedMaintenance SSK-3 MaintenanceDisassemble the material line on the lateral inlet of the hopper Disassemble the hopperSSK-3 4.2.1. Replace the sealing rings Nonreturn valve MaintenanceFold the hopper lid upwards F Observe the direction of installation B Install the hopper SSK-3 Outlet flapMaintenance AB Installation sealing ringMaintenance SSK-3 4.2.2. Adjust the flap switch4.2.3. Cleaning the hopper MaintenanceSSK-3 Spare parts list 5. Spare parts listSSK-3 29253SSK-3 Spare parts list97704 ∅ 50 mm 05956 ∅ 40 mm 264876.1. Dimension sheet 6. Technical dataTechnical data SSK-3