Manuals / Sterling / Marine Equipment / Marine Battery

Sterling SSk-3 SSK-3 Outlet flap, F Observe the direction of installation B Install the hopper

Models: SSk-3

1 28

Download 28 pages 50.69 Kb

Page 23

Image 23

SM3-610

SSK-3

Outlet flap

Draw the old sealing ring (A) off the nozzle of the material outlet. Install the new sealing ring (A).

FObserve the direction of installation (B).

Install the hopper.

&	Order number sealing ring: ID 29258

180 °

AB

Installation sealing ring

Maintenance 22

Page 23

Image 23

Sterling SSk-3 SSK-3 Outlet flap, F Observe the direction of installation B Install the hopper, Maintenance, SM3-610

Contents

SM3-610 Sterling Material ProcessingOperating Instructions Conveyor Hopper SSK-3 SM3-610 Technical serviceSSK-3 Sterling Material Processing Telephone 800 Edition 12/97SSK-3 Sales and Contracting Department Parts and Service Department3. Functional description 4. Maintenance Table of contents1. Safety instructions 2. Installation instructionsSSK-3 1. Safety instructionsSafety instructions Safety instructions SSK-3 1.1. Warnings and symbolsSafety instructions ∙ ∙ ∙ ∙ ∙ ∙SSK-3 1.2. Explanations and information Safety instructions SSK-3 1.3. For your safety1.4. For the safety of the equipment SSK-3 2. Installation instructionsInstallation instructions Installation instructions SSK-3 2.1. Transport2.2. Set-up SSK-3 Mount the hopper loader in such a way that the outlet flap swings in a right-hand angle to the direction of machine movement. Please check during assembly that the admissible bearing loads are not exceededInstallation instructions Installation instructions SSK-3 2.3. Compressed-air supply only with compressed-air valvesThe rules of the local electricity board must be observed SSK-3 2.4. Electrical connectionInstallation instructions SM3-610 Installation instructionsSSK-3 SSK-3 3. Functional descriptionFunctional description SSK-3 4. MaintenanceMaintenance SSK-3 Please observe the maintenance intervalsMaintenance Daily 4.1. Maintenance intervalsMaintenance Maintenance SSK-3 4.2. Disassembling the hopperWait until the conveying procedure has stopped Disassemble the hopper MaintenanceSSK-3 Disassemble the material line on the lateral inlet of the hopperFold the hopper lid upwards SSK-3 4.2.1. Replace the sealing rings Nonreturn valveMaintenance AB Installation sealing ring SSK-3 Outlet flapF Observe the direction of installation B Install the hopper MaintenanceMaintenance SSK-3 4.2.2. Adjust the flap switchSSK-3 4.2.3. Cleaning the hopperMaintenance 29253 5. Spare parts listSpare parts list SSK-326487 Spare parts listSSK-3 97704 ∅ 50 mm 05956 ∅ 40 mmSSK-3 6. Technical data6.1. Dimension sheet Technical data