Sterling SSk-3 operating instructions Cleaning the hopper, SSK-3, Maintenance

4.2.3. Cleaning the hopper

Open the toggle-type fasteners be- tween the hopper lid and the hopper loader.

Fold the hopper lid upwards.

Check the sieve within the hopper lid (A) for material residue. For cleaning, disassemble the sieve: Pull the sieve out of the sealing ring.

Clean the sieve by means of com- pressed-air.

Install the sieve.

Check the sieve for proper fit.

Clean the hopper loader by means of a vacuum cleaner.

Close the hopper lid.

Close the toggle-type fasteners.

Open the toggle-type fasteners (B) on the flap of the hopper loader.

Check the filter (D) and the filter mat

(C) in the flap for material residue. Clean the filter by means of com- pressed air.

SSK-3

A
B
C	D

SSK-3

Close the toggle-type fasteners (B) on the flap of the hopper loader.

Install the hopper.

SM3-610

Maintenance 24