English / USA

:Now turn tensioning screw (9 or 10) clockwise until there is very little chain sag on the underside of the bar and the drive link tangs are located in the bar groove.

:Refit the sprocket cover and screw on the nut fingertight.

Arrow (11) indicates direction of chain rotation.

Go to “Tensioning the Saw Chain”.

Models with Quick Chain

Tensioner

1

3 2

100BA028 KN

: Disconnect plug from power supply.

: Swing up the hinged handle (1) so that it snaps into position.

: Turn the wingnut (2) counterclockwise until it hangs loose in the chain sprocket cover (3).

: Remove the sprocket cover.

4

100BA007 KN

:Remove the tensioning gear (4) and turn it over.

5

135BA005 KN

:Take out the screw (5).

6

7 KN135BA006

8

135BA007 KN

:Position the tensioning gear (6) against the guide bar (7).

:Fit and tighten down the screw (8).

MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C

25