English / USA

Specifications

MSE 140 C

 

Voltage

120 V

Frequency

60 Hz

Rating

1.4 kW

Enclosure

IP 20

Insulation

II

Amp rating

15 A

MSE 180 C

 

Voltage

120 V

Frequency

60 Hz

Rating

1.8 kW

Enclosure

IP 20

Insulation

II

Amp rating

15 A

Chain lubrication

Fully automatic speed-controlled oil pump

Oil tank capacity 6.8 oz (0.20 L)

Weight

without bar and chain

MSE 140 C

7.3 lbs (3.3 kg)

MSE 180 C

7.7 lbs (3.5 kg)

Cutting Attachment

Recommended cutting attachments for compliance with § 5.11 of ANSI standard B 175.1-2000

(see page 13 of this manual):

Guide bar

STIHL reduced kickback bar (with green label) for 3/8" P pitch:

-Picco Micro Mini, groove width 0.04 in (1.1 mm)

-Picco Micro, groove width 0.05 in (1.3 mm)

Rollomatic with sprocket nose 12, 14 or 16 in (30, 35 or 40 cm)

Oilomatic chain

STIHL low kickback chain1) (with green label)

for 3/8" P pitch:

3/8" (9.32 mm) Picco-Micro Mini (61 PMMC3, 61 PMN)

3/8" (9.32 mm) Picco-Micro (63 PMC3, 63 PM1)

Spur sprocket:

7-tooth for 3/8" P pitch

Since new bar/chain combinations may be developed after publication of this manual, ask your STIHL dealer for the latest recommendations.

1)See definition of "low kickback chain" on page 15 of this manual.

In order to comply with the kickback performance requirements of § 5.11 of ANSI standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI

§5.11 requirements on this specific

powerhead, or has been designated as "low kickback" saw chain1) in accordance with the ANSI B 175.1-2000 standard.

1)See definition of "low kickback chain" on page 15 of this manual.

44

MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C