INSTALLATION INSTRUCTIONS
Upper Baffle
Lower Baffle
PR8057
5.3Remove the Lower Baffle (see diagram) by lifting the front edge to unhook it from the support bars
•Pull the baffle forward to disengage the rear edge from the location above air inlet holes
•Rotate the baffle to remove from the firebox through the door opening.
6.FITTING AND REMOVAL OF THE FIRE BRICKS
6.1Remove the firebricks as part of the routine maintenance. This can be carried out without the use of tools.
6.2Allow the appliance to cool fully before removing firebricks.
6.3Take care when handling, as bricks can become fragile after use. Life span depends on the type of fuels burnt and the level of use.
•Replace damaged bricks as soon as possible
6.4Remove the baffles and grate system
•Remove secondary air facia plate screws using a pozidrive screwdriver
•Remove the bricks in the correct order as shown in
Diagrams 11 and 12
Riva PLUS Small |
6
8 | 7 |
| PR8058 |
Lower Baffle |
5.4 Next, remove the Upper Baffle (see diagram) by pulling |
5
2
1
4
3
PR8118
forward to disengage it from the hanging points at the top |
of the firebox |
• Rotate the baffle to remove it from the firebox through |
the door opening. |
5.5 Reverse the above process to replace the baffles |
|
| PR8059 |
|
| |
Upper Baffle |
Do not modify the baffle
Riva PLUS Large
8 | 7 |
| 9 |
6 |
|
| 5 |
|
|
| |
3 |
|
| 4 |
|
|
| |
1 |
|
|
|
|
| 2 | PR8061 |
|
|
|
22