INSTALLATION INSTRUCTIONS
Flue pipe x 612 long
Self tapping screws
Seal Collar with
fire cement
All models | PR8054 |
2.2Connect a flue pipe 612mm long by inserting it into the flue spigot and seal using fire cement. Fit the cast iron finishing collar over the flue pipe and locate into recess in the top cover
|
|
|
|
| Connection to chimney as detailed | ||||
|
|
|
|
|
| in Building Regulations | |||
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 135 Elbow with |
|
| |
|
|
|
|
|
| access cover |
|
| |
minimum600mm |
|
|
|
|
|
| |||
1000mmmax unsupported |
|
|
|
|
| ||||
|
| Flue Pipe x 612 long |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All Models | PR8052 |
|
|
3. REAR FLUE INSTALLATION
Because the stove is supplied for top flue exit, you need to move the blanking plate to the top of the appliance and the fit the collar and flue pipe to the rear:
3.1(Tools required -
• Remove the flue
3 Small Lugs |
Cut Using |
Saw |
PR8064 |
3.2To change from top to rear exit flue, reverse the flue spigot and blanking plate using the method detailed.
• Remove the upper and lower baffle, see Section XX
Flue collar |
| |
Upper & |
| |
Lower Baffle | Blanking | |
Rear bricks | ||
cover | ||
| PR8065 |
•Remove the top bricks, see Section 5
•Remove the flue collar using a 10mm A/F spanner/socket wrench to remove the 4 fixing bolts including the 2 flanged spacers
•Remove the blanking plate using a 10mm A/F spanner/socket wrench to take out the 4 bolts
20
