Stow cs403026 Stow CS4030 SAW Rules for Safe Operation, Fatigue, illness or taking medicine

STOW CS4030 SAW — RULES FOR SAFE OPERATION

RULES FOR SAFE OPERATION	■ NEVER operate this equipment when not feeling well due to
	fatigue, illness or taking medicine.

WARNING

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the STOW CS4030 SAW .

SAFETY

■DO NOT operate or service this

equipment before you read, understand, and comply with all safety messages in this manual. The manual must be kept available and accessible to the operator.

■This equipment should not be operated by persons under the minimum statutory age limit.

■NEVER use this machine for any purpose other than those described in this manual.

■NEVER operate the saw without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required for the job.

■NEVER use accessories or attachments which are not recommended by the manufacturer for this equipment. Damage to the equipment and/or injury to user may result.

■Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties. Any modification which could lead to a change in the original characteristics of the machine should be made only by the manufacturer who shall confirm that the machine is in conformity with appropriate safety regulations.

■NEVERoperatethesawunder the influence of drugs or alcohol.

■AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts, this can cause a serious injury.

■Replace operation and safety decals when they become difficult to read.

■The engine of this saw requires an adequate free flow of cooling air. NEVER operate the saw in any enclosed or narrow

area where free flow of the air is restricted. If the air flow is restricted it will cause serious damage to the engine and may cause injury to people. Remember the engine can give off harmful toxins and will displace oxygen.

■Make certain the operator knows how to and is capable of turning the engine OFF in case of an emergency.

■Turn engine OFF prior to fueling the saw.

■ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

■Topping-off to filler port is dangerous, as it tends to spill fuel.

■NEVER use fuel as a cleaning agent.

■ALWAYS use extreme caution when working with flammable liquids. Allow the engine to cool before adding fuel or performing service and maintenance functions.

■NEVER operate the saw in an explosive atmosphere where fumes are present, or near combustible materials. An explosion or fire could result in severe bodily harm or even death.

■NEVER smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot! engine.

PAGE 12 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)