![](/images/new-backgrounds/1209511/209511107x1.webp)
1. Hydraulic Reservoir
2. Filter
3.Pump
4. Lift Cylinder
5. Wheel Motor
6. EngineTilt Cylinder
7.Motor
8.Pump Body
STOW CS4030 SAW — MAINTENANCE
1
3
2
7
6
5 8
5
4
Figure 65. Hydraulic System
3.Collect and dispose the used oil (and filter) in accordance with ordinances and regulations of your area.
4.Remove used oil filter.
5.After oil is drained, reinstall drain plug.
6.
1 2
3
Figure 66. Hydraulic System Drains
CAUTION
To prevent hydraulic pump damage,
7.Add oil to the system reservoir.
8.The reservoir will need to be filled several times.
1. Place an oil drain pan beneath the Blade Shaft drain plug. | 9. Run the engine for | |
the system. | ||
|
2.Remove the drain plug from the bottom of the Blade Shaft Housing.
10.Add oil as required.
11.Repeat process until oil level is stable after running engine.
PAGE 54 — STOW CS4030 SAW • OPERATION MANUAL — REV. #0 (12/13/07)