Sub-Zero BI-48SD, BI-36R manual subzerotrade.com, IMPORTANT NOTE On glass door models, the edges of

Framed Panels

Framed Panels. If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6). If the panel is thicker than 1/4" (6), a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations.

IMPORTANT NOTE: On all framed models, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this guide.

13

subzerotrade.com

TRIM

REVEAL

1/4" (6) min

1/4" (6)

PANEL

MAIN FRAME

DOOR

TRIM

REVEAL

1/4" (6) min

ROUT TO 1/4" (6)

MAIN FRAME

DOOR

Framed

IMPORTANT NOTE: On glass door models, the edges of	Panels 1/4" (6) thick or less. Panels thicker than 1/4" (6).
the window cut-out will need to be finished, as they will
be exposed.
IMPORTANT NOTE: When installing two units in a side by
side application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.

Do not exceed the framed decorative panel dimen- sions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.