Side Panels
Side Panels. Side panels can be used with all framed, overlay, flush inset and stainless steel design applica- tions. When planning for side panels with the installation of a built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may change the width of your rough opening.
When installing a built-in unit with a custom side panel, an accessory kit (7003407) is required. Classic stainless steel and white enamel side panels are also available through your Sub-Zero dealer.
The side panel will need to be a minimum of 24" (610) deep and 1/2" (13) thick. Refer to the side panel dimen- sions illustration for additional specifications. Routing will be necessary in order for the side panel to fit flush against the side of the unit. Refer also to the routing detail illustration.
IMPORTANT NOTE: If you have a Model BI-30U, BI-30UG, BI-36U or BI-36UG, extra routing will be necessary to avoid having the panel hit the refrigerator lower hinge plate.
29
subzerotrade.com
24" (610)
ROUT TO 1/8" (3)
17/8"(48)
1" (25)
41/4" (108)
ROUT TO
3/16" (5)
MODELS)
4" (102)
OPTIONAL
TOE KICK
FRONT
OF SIDE
PANEL
84"
(2134)
53/4"
(146)
201/2"
(521)
2 5/8"
(67)
1" (25) |
|
| 17/8" (48) |
1/8" (3) |
|
1/2" (13) |
|
MAIN | SIDE PANEL |
FRAME | ROUTING |