Flush Inset
Flush Inset Application | 22 |
Flush Inset Application. It is necessary to consider the following points when planning for a flush inset application:
•The flush inset depth is 23/16" (56) deeper than the standard opening.
•The flush inset width is 21/2" (64) wider than the standard opening.
•The flush inset height is 1/4" (6) higher than the standard opening.
•Panel widths increase to achieve the flush inset look.
•You must allow a 1/2" (13) reveal around the perimeter of the unit and grille to allow for proper door swing and airflow.
IMPORTANT NOTE: Do not confuse the flush inset applica- tion as being a separate model. This is an overlay unit in a flush installation. The same model is used in an overlay or flush inset application.
Rough opening dimensions for the new flush inset appli- cation assume the use of a 3/4" (19) decorative panel. The illustrations below show the difference between standard and flush inset installations.
This brand new design option allows for a flush door and grille. Classic, platinum and carbon stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf L Series ovens.
STANDARD INSTALLATION
24" (610) |
OPENING |
DEPTH |
TOP VIEW
FLUSH INSET INSTALLATION | |
WITH 3/4" (19) PANEL | |
24" (610) | 26 3/16" |
OPENING | (665) |
DEPTH | FLUSH |
| INSET |
| DEPTH |
| TOP VIEW |
23/16" | 11/4" |
(56) | (32) |
Standard installation. | Flush inset installation. |