Plumbing Requirements
Water Supply Line
Water Pressure
Excess Water Line for Connection
Planning Information
Plumbing Requirements. All built-in models with an automatic ice maker come with a microbiological water filtration system. The water supply line should be located within the shaded area shown in the illustration. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.
IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 30 psi (2.1 bar) to 100 psi (6.9 bar) supplied to the unit at all times. In this application, the microbiological water filtra- tion system should be set to bypass mode by removing the water filter cartridge and inserting the bypass plug (7005018) available from your Sub-Zero dealer. Installation instructions packed with the unit will outline this procedure.
11
1/4" OD copper line
36" (914)
subzerotrade.com
18" | 6" |
(457) | (152) |
1/2" |
|
(13) | WATER LINE |
| |
| |
VALVE |
|
TOP VIEW
| FRONT VIEW |
|
| 18" | 6" |
| (457) | (152) |
3" (76) | W |
|
