Sub-Zero BI-42S Dual Installations, Dual flush inset panels and dual installation kits are avail

Dual Installations 32

Dual Flush Inset Installation. Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your Sub-Zero dealer.

Dual installations without a filler strip can only be accom- plished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illus- trations B and C require a filler strip. Illustration A is the only application that will accommodate the dual wide grille.

IMPORTANT NOTE: The application shown in illustration A can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.

Dual flush inset panels and dual installation kits are avail-

Dual Flush Inset Installationable through your Sub-Zero dealer. Refer to pages 34–35 for dual flush inset panel specifications and page 36 for information on dual installation accessory kits.

Dual Installations

Dual Installation Panel Requirements

MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F	75 lbs (34 kg)
All Other Models	50 lbs (23 kg)
Dual Wide Grille Panel	26 lbs (12 kg)
MIN PANEL THICKNESS
Flush Inset Panels	5/8" (16)

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED

FILLER STRIP REQUIRED

Illus. A Illus. B Illus. C