For additional information on model specific panel reveals, visit the Specification Library section of our website, subzerotrade.com.
Panel Offsets
ALL REFRIGERATOR / ALL FREEZER Doors (hinge) / Grille Sides Doors (handle) Sides
Grille Top
Grille Bottom / Door Top Door Bottom
Doors (hinge) / Drawer / Grille Sides Doors (handle) Sides
Grille Top
Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom
Do not exceed the flush inset decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.
Dual Installations
Flush Inset Panels—Dual Installation. When installing two built-in models side by side in a flush inset application, you must decrease the width of the decora- tive flush inset panels by 1/2". Adjustments to the panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.
IMPORTANT NOTE: If a filler strip is not used, dual instal- lations can only be accomplished using two units with opposite hinges.
Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model. All reveals are 1/2" (13) unless other- wise specified.
34
TOP VIEW |
|
DOOR / DRAWER / GRILLE | |
BACKER | CABINETRY |
SPACER |
|
FLUSH INSET PANEL |
|
5/16" (8) | 1/2" |
| (13) |
| 5/8" |
| (16) |
| TOP VIEW |
| DUAL |
| TRIM |
DOOR | DOOR |
5/16" (8) |
|
1/8" (3) |
|
| 1/4" (6) |
| REVEAL |
Illus. A | Illus. B |
Dual Installations
Illus.
A
B
C
D
F
A
B
C
D
E
F
CABINETRY |
|
| 1/2" (13) |
| 1/8" |
GRILLE | 5/16" (3) |
| (8) |
| SIDE VIEW |
Illus. C
| 5/16" |
| (8) 3/32" |
| (2) |
DOOR |
|
| 5/8" (16) |
DRAWER | 5/32" |
| |
| 5/16" (4) |
| (8) |
| SIDE VIEW |
GRILLE | 5/16" |
(8) 5/32" | |
| (4) |
| 1/2" (13) |
DOOR | 3/32" |
| |
| 5/16" (2) |
| (8) |
| SIDE VIEW |
Illus. D
DOOR / |
|
DRAWER |
|
| 5/16" |
| (8) |
| 3/32" |
SIDE VIEW | (2) |
Illus. E | Illus. F |
