Step 'art to remove
-
13.Rotor
Descrlptlon | Remarks | Tool |
(1) Take off the through bolt. | Box | wrench |
Applya boxwrenchontheheadof | Plastic hammer |
through bolt. Hitthe wrench handle with a hammer
Fig.
(2)Putthe engine ontheworkingtable recoil starter side down.
(3)Use a bolt and oil as a tool for pulling out rotor in the following procedures:
1.Pour engine oilinto the center holeof rotor shaft.
Fill with oil tothe shaft end. (See Fig.
2.Prepare aboltwiththefollowing thread size : M8 X P 1.25
3.Apply a few turns of seal tape around the tip of the bolt.
(See Fig.
| I |
Fig. | Fig. |
- 39 -