Dart to remove | Descrlptlon | I |
13. Rotor | 4. Screw the bolt into the thread | of the |
rotor shaft.
5.Torque the bolt using a socket wrench until the rotor comes off loose.
* The hydraulic pressure inside the rotor shaft takes apart the rotor fromthe engine shaft.
(4) Wipe off oil throughly from rotor shaft and enginePTO shaft.
Fig.
14.Front bracket (1) Remove the frontbracket,which is
mountedonthemainbearingcover of the engine, by taking out four M8 X 18 bolts. (SeeFig.
Fig.
-
RemarksTool
12mm box spanner or Socketwrench
12mm boxspanner
- 40 -