Sun Microsystems 6U manual A. Specifications, Removing and Replacing the Adapter

Booting the System Over a Sun Quad FastEthernet Interface 48
▼ To Boot the System Over the Network	48
A. Specifications 51
Ethernet Port Locations and Descriptions	52
Operation Specifications 53
Physical Dimensions 54

	Physical Dimensions of the Rear-Access Adapter			54
	Physical Dimensions of the Front-Access Adapter			55
	Environmental Specifications 55
	Power Requirements 56
B.	Configuring the Sun Quad FastEthernet Device Driver Parameters 57
	Sun Quad FastEthernet Device Driver Parameters		58
	Hardware Overview 58
	Device Driver Parameter Values and Definitions			59
	Parameters that Define the Current Status 60
	Interpacket Gap Parameters	60
	Defining an Additional Delay Before Transmitting a Packet					61
	Operational Mode Parameters	62
	Defining the Number of Back-to-Back Packets to Transmit					63
	Parameters That Report Transceiver Capabilities			63
	Parameters That Report the Link Partner Capabilities				64
	Setting the qfe Device Driver Parameters 65
	Using the ndd Utility to Set and Display Parameters 65
	Setting Parameters Using the qfe.conf File		72
	▼ To Set Driver Parameters By Creating a qfe.conf File				73
C.	Removing and Replacing the Adapter 75

Contents ix