Sun Microsystems 6U manual Removing and Replacing the Adapter, A P P E N D I X C

A P P E N D I X C

Removing and Replacing the

Adapter

This appendix describes how to disable the adapter’s qfe interfaces prior to removing the adapter from a system, and how to activate the interfaces after replacing the adapter.

This appendix contains the following sections:

■“Disabling the Network Interfaces and Removing the Adapter” on page 76

■“Replacing the Adapter and Activating the Network Interfaces” on page 78

These procedures apply to both the rear-access and front-access versions of the adapter.

Note –The procedures for removing and replacing the adapters are system-specific and are beyond the scope of this manual. If you are required to reinstall the cards, you must follow the instructions outlined in your system’s service manual for the removal and replacement of network interface I/O cards.

75