Sun Microsystems A3500FC manual 1 1x2 Configuration, Option Switch

3.1.11x2 Configuration

The 1x2 configuration includes one controller module with two StorEdge D1000 disk arrays.

Note –The 1x2 configuration is not qualified on the A3500FC controller module.

3.1.1.1Option Switch

Both disk arrays have split buses. Their option switches should be set as shown in FIGURE 3-2.

5 4 3 2 1

FIGURE 3-21x2 Option Switch Settings for StorEdge D1000 Disk Array

This setting will cause the disk drives in the StorEdge D1000 disk arrays to be numbered as shown in FIGURE 3-3and FIGURE 3-4.

0 1 2 3

0 1 2 3

FIGURE 3-38-Drive StorEdge D1000 SCSI ID (Split Bus)

Chapter 3 Sun StorEdge A3500/A3500FC Configurations 3-3