Sun Microsystems S16A manual Contacting EDT, cd /pub/s16a/4x, get README

Contacting EDT S16A User’s Guide

Contacting EDT

Contact EDT directly at the following address or phone numbers:

Engineering Design Team, Inc.

1100 NW Compton Drive, Suite 306

Beaverton, Oregon 97006

Phone (503) 690-1234

FAX (503) 690-1243

In addition, a variety of services, from sales information to updated manuals to technical support, is available through EDT’s World Wide Web site, at

http://www.edt.com

If you have had the board for a period of time before installing it, we recommend you get the latest software over the internet to ensure you have all the latest enhancements. You can either do this by accessing our World Wide Web page, and selecting Technical Support, then Software, then specifying which operating system version and driver to download. Alternately, you can use ftp to get the software directly using the following procedure:

1.FTP to the EDT ftp server by typing ftp ftp.edt.com

2.Login as anonymous. The password is your e-mail address.

3.Change to the appropriate directory for the version of the operating system you are running. If you are running SunOS 4.1.3 or later, type

cd /pub/s16a/4x

If you are running SunOS 5.x (Solaris 2.4 or later), type cd /pub/s16a/5x

4.Set binary transfer mode by typing bin

5.Download the software and README file: get EDTs16a.tar.Z

get README

6.Exit ftp: quit

7.Follow the instructions in the README file to extract and install the software from the .Z file.

The latest release of this manual is also available, via the World Wide Web site under Technical Support, Manuals, or via ftp to ftp.edt.com in /pub/manuals/s16a.ps.Z (postscript format, compressed).

40 EDT, Inc. October, 1996