Building the Sample Programs | Sun Microsystems S16A specs

Installation

S16A User’s Guide

3.Enter:

make unload

Using System V Release 4 (Solaris 2.4 or Later)

If you are using Sun System V Release 4 (Solaris 2.4 or later), use the following procedure to install the S16A driver:

1.Become root or superuser.

2.Place the diskette that came with the S16A into the diskette drive.

3.Enter:

volcheck

pkgadd -d /floppy/floppy0 EDTs16a

The pkgadd program asks several confirmation questions, which you can answer with a y for affirmative. Refer to your Solaris system administration documentation for further information on the pkgadd command.

To remove the S16A driver:

1.Become root or superuser.

2.Enter:

pkgrm EDTs16a

For further details, consult your Solaris 2.0 documentation, or call Engineering Design Team, Inc.

Building the Sample Programs

To build any of the example programs, enter the command:

make file

where file is the name of the example program you wish to install, without the .c suffix.

To build and install all the example programs, simply enter the command:

make

All example programs display a message that explains their usage when you invoke them with the -hswitch.

4	EDT, Inc. October, 1996

Image 8

Sun Microsystems S16A manual Using System V Release 4 Solaris 2.4 or Later, Building the Sample Programs

Contents

S16A EDT, Inc. October Contents Tables Overview Installation Installing the HardwareInstalling the Software Using SunOS Version S16A User’s Guide Installation Using System V Release 4 Solaris 2.4 or Later Building the Sample Programs Included Files Readme Input and Output Elements of S16A Applications General DMA Library Routines DMA Library RoutinesRoutine Description S16abufferaddresses S16A-specific Library RoutinesSyntax Arguments S16achecknextbuffer S16acancelS16acancelcurrent S16aclose S16aconfigureringbuffers Arguments S16adone S16agetdaccontrolreg S16agetdiodatareg S16agetdiodirectionreg S16agetoutputbits S16aopen S16aread S16aserialread S16aserialstr S16aserialwrite S16asetdefaults S16asetdaccontrolreg S16asetdiodatareg S16asetdiodirectionreg S16asetoutputbits S16astartbuffers S16astopbuffers S16awaitforbuffer S16awaitfornextbuffer S16awrite Error Codes and Conditions Error ConditionsFoiparityerror Hardware Interface Electrical Interface S16A Interface Signals Interface SignalsSignal S16A I/O Description Connector Pinout Connector PinoutPin Signal Registers SBus Addresses S16A ROM Next DMA Address Registers DMA RegistersCurrent DMA Address Registers Current Count Registers Control and Next Count Registers Direct I/O Registers DAC Output Control RegisterDIO Direction Register DIO Data Register Analog Input Module Internal Registers DAC Output Control RegisterName Description Analog Input Module Internal Registers Input Configuration Registers Input Clock Prescale Registers Trim Registers Input Gain High Byte ValuesTrim Register Use Trim Registers Trim Output Offset Registers Temperature Register Analog Input Module Uart RegistersAnalog Input Module Control Protocol Trim Input Gain Registers Write to an Input Configuration Register Read from an Input Configuration RegisterWrite to a Clock Prescale Register Read from a Clock Prescale Register Uart Command/Status Register Read the Temperature RegisterUart Command/Status Register Write to a Trim Register Xilinx Programming Registers Uart Data Register Specifications References Contacting EDT Index 15-16 Configuration ROM